6
Setting Measuring Conditions
s
3
Detailed Measurement
7
Specify the ending condition.
[ M]
[TIME]
(∆M or time input.)
As the ending condition, you can select either
the amount of change in moisture content per
30 seconds or the time.
If ∆M is selected, specify the value within
the range from 0.01 % to 0.1 % in 0.01-percent
increments.
If TIME is selected, you can set a time between
0 and 240 minutes, in minutes.
Press
to save the measurement conditions.
8
Return to the standby state.
Press
to return to the standby state
(measurement display) where measurement can
be performed.
! ! ! ! !! !M!
///
////
//
//
//
! ! ! !0.0!5!
/ / / / /
/
/
//
//
//
/
/
/ /
///
////
//
//
//
! ! ! ! !! !M!
///
////
//
//
//
! ! ! !0.0!5!
/ / / / /
/
/
//
//
//
/
/
/ /
///
////
//
//
//
! ! !T!I!M!E!
///
////
//
//
//
!
/ / / / /
/
/
//
//
//
/
/
/ /
///
////
//
//
//
! ! !T!I!M!E!
///
////
//
//
//
!
/ / / / /
/
/
//
//
//
/
/
/ /
///
////
//
//
//
! ! !S!T!E!P!
! ! !0.0!0!0!
! ! !S!T!E!P!
! ! !0.0!0!0!
/ / / / /
/
/
//
//
//
/
/
/ /
/ / / / /
/
/
//
//
//
/
/
/ /
