Shimadzu ICPE-9000, Instruction Manual

Page: 67 / 116

6 Specifications
6-3
6.5.4 User Support
x
Development assistant
x
Diagnosis assistant
6.5.5 Instrument Control
x
Monitor display of instrument status
x
Control of vacuum pump
x
Automatic igniting/extinguishing of plasma
x
Automatic extinguish function that operates when analysis completed
x
Automatic control of autosampler
6.6 Utilities
6.6.1 Power Supply Requirements
Single phase,200/220/230/240 V ±10% (upper limit: 250 V), 50/60 Hz, 30 A
6.6.2 Ground
30 Ω max., independent ground
6.6.3 Argon Gas
Purity 99.95% min.; Pressure: 450±10 kPa
6.6.4 Cooling water
Mains water Pressure: 100 kPa to 300 kPa; Flow rate: 1 L/min min.
CCD cooling water Temperature setting range: 0
°
C to room temperature
Temperature control precision: ±0.1
°
C
Cooling capacity: 200 W min.; Liquid temperature: 10
°
C
Pumping capacity (maximum pump head): 2.1 m min. at 50 Hz, 2.4 m min. at
60 Hz
Coolant may be pumped to the main unit only while pumping signals are
being output from the main unit.
Pumping signals: 24 VDC, 0.5 A
6.6.5 Installation Conditions
Temperature 18
°
C to 28
°
C (temperature must not fluctuate more than 2
°
C/hour)
Humidity 20% to 70% (with no condensation)
6.6.6 Dimensions and Weight
Dimensions 1,380 mm (width) × 740 mm (depth) × 760 mm (height)
(not including plasma stand exhaust guide)
Weight 270 kg
6.6.7 Options
Autosampler
Radial-view observation kit (option)
Hydrofluoric acid sample introduction system
Ultrasonic nebulizer