Shimadzu ICPE-9000, Instruction Manual

Page: 30 / 116

3 Preparation for Installation
3-2
3.2 Installing and Handling the Data Processing Unit
General points to note regarding the installation and handling of the data processing unit are given
below.
3.2.1 Operating Environment and Storage
(1) Do not install the unit in a location where the display screen will be directly exposed to sunlight
or light emitted by lighting fixtures in the ceiling.
(2) Do not install the unit in a location where it will be exposed to direct sunlight or near heating
equipment, such as stoves.
(3) Do not install the unit in a location subject to large amounts of moisture or dust.
(4) Do not install the unit in a location subject to shocks or vibrations.
(5) Do not install the unit on a slope.
3.2.2 Maintenance
(1) If the main unit becomes dirty, wipe it with a soft, dry cloth. If the dirt is particularly difficult to
remove, dip a cloth in some diluted neutral detergent, wring out the cloth, and use it to wipe off
the dirt. Finally, wipe the unit with a dry cloth. Do not use benzene or thinner as this may cause
discoloration.
(2) Wipe the display screen with a dry cloth.
3.2.3 Other Points
Be careful not to subject the computer to shocks when carrying it. Otherwise, faults may occur. Also,
disconnect the power plug and connecting cable before moving the computer.
If nothing appears on the screen or if there is an unusual sound or smell, turn OFF
the power immediately. It is dangerous to continue operation in this state.
CAUTION