Universal Transaction Gateway
Using Legacy External Devices
© 2019 Shift4 Payments, LLC. All rights reserved.
Version 1.4
External Use NDA
Page 6 of 64
Requirement:
Verify that UPOS Interface Application, Version
2.10, Kernel 2.77, SSA 02.12, MNT 01.26 displays on the Ingenico
i6550 screen on boot-up. If the version information is not displayed,
contact the Shift4 Customer Support team at 702.597.2480, option
2.
Booting the Device
To boot the Ingenico i6550, complete the following steps:
8. Simultaneously press and hold the
1
,
3
,
Cancel
, and
Enter
buttons and then release.
9. To open the SSA System menu, press and hold the
Clear
button. During boot-up the device beeps
and startup routines flash briefly on the screen.
10. On the SSA System menu, select
Configuration Ticket
.
11. On the Configuration Ticket menu, select
App Ticket
.
12. On the Application Config screen, verify the following applications are loaded on the device in the
Application List section:
•
CA0300_IBMEF (#3)
•
US0901_UIA__ (#9)
13. To return to the SSA System menu, press the
Cancel
button twice.
Verifying Device Settings
Device settings are nested several levels beneath the SSA System menu. To verify and set device
parameters, complete the following steps:
14. From the SSA System menu, select the
Extended
menu.
15. From the Extended menu, select the
Supervisor
menu. This menu is password protected. Contact
the Shift4 Customer Support team at 702.597.2480, option 2 for the default password.
16. To open and set the Supervisor menu options, type the password and the following settings:
•
Select
Sys Parameters