Universal Transaction Gateway
Using Legacy External Devices
© 2019 Shift4 Payments, LLC. All rights reserved.
Version 1.4
External Use NDA
Page 11 of 64
Setting the Coordinates File for i6550 and i6780 in TuneUp
If you are using an Ingenico i6550 or i6780 and you want to change the position where totals, sub totals,
or tip should print on the form, you must customize and specify a Coordinates File by doing the following:
1. Under the Devices tab, select the PIN Pad and then, click the
Edit
button.
2. Click
Browse
.
The following message appears.
3. Select the desired Coordinates File. A default Coordinates File should have been downloaded with
the Shift4 forms. Each device will have its own coordinates file. An example file with field explanations
is provided below the screenshot.