SHIFT4 UTG Ingenico 3070 Manual Download Page 50

Page: 50 / 64

Universal Transaction Gateway

Using Legacy External Devices

Version 1.4

External Use NDA

Page 50 of 64

•

Select

USB

RS232

as appropriate.

116.

Load the applications on the device:

•

Select the

File Transfer

icon.

•

On the RS-232 cable, insert the USB drive into the USB port.

•

Select the

USB storage

icon.

•

For the initial installation complete the following step:

Select

Full

to download the FormAgent files.

117.

To return to the previous menu, select the

File Manager

icon.

118.

To verify successful application load, select the

Run Application

icon.

Downloading Verifone MX Tools

To download Verifone MX Tools click

https://myportal.shift4.com/downloads/VerifoneMXTools.zip

download the zip file and extract the files to a temporary directory.

The files will include the following:

•

MX Downloader – Verifone’s tool used to push files to Verifone devices

•

MX_FormMgr_3.03B – Verifone’s Form Manager tool used to customize forms

•

MX_USB Driver – Verifone’s USB driver

•

VeriTar – Verifone’s VeriTar application used to create TGZ files

Note:

Verifone Tools are supplied by Verifone. For more

information on Verifone Tools contact Verifone.

Summary of Contents for UTG Ingenico 3070































































Search results

Summary of Contents for UTG Ingenico 3070

Reviews:

Related manuals for UTG Ingenico 3070

Brands by name

Popular brands

SHIFT4 UTG Ingenico 3070, Manual

Search results

Summary of Contents for UTG Ingenico 3070

Reviews:

Related manuals for UTG Ingenico 3070

Brands by name

Popular brands