SHIFT4 UTG Ingenico 3070 Manual Download Page 2

Page: 2 / 64

Universal Transaction Gateway

Using Legacy External Devices

Version 1.4

External Use NDA

Page 2 of 64

Copyright Notice

Shift4 Payments

1491 Center Crossing Road

Las Vegas, NV 89144

702.597.2480

www.shift4.com



[email protected]

Document Title: The Universal Transaction Gateway Using Legacy External Devices
Publication Date: June 27, 2019

Universal Transaction Gateway

(UTG)

, Lighthouse Transaction Manager, 4Go

, i4Go

, and 4Word

are covered by one or

more of the following U.S. Pat. Nos.: 7770789; 7841523; 7891563; 8328095; 8688589; 8690056; 9082120; 9256874; 9495680.

All trademarks, service marks, product names, and logos are the property of their respective owners. Shift4 Payments may have

patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document.

The furnishing of this document does not give any license to these patents, trademarks, copyrights, or other intellectual property

except as expressly provided in any written license agreement from Shift4 Payments. All graphics are property of Shift4 Payments.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without prior

written permission of Shift4 Payments. The contents of this publication are the property of Shift4 Payments. Shift4 Payments

reserves the right to revise this document and to periodically make changes to the content thereof without any obligation or

notification to any organization of such revisions or changes unless required to do so by prior written agreement.

Notice of Confidentiality

This document contains information that is proprietary to Shift4 Payments. It carries the Shift4 classification “External Use NDA.” It is

provided for the sole purpose of specifying instructions for Shift4 Payments products. The recipient agrees to maintain this

information in confidence and not reproduce or otherwise disclose this information. Please refer to the signed Bilateral Non-

Disclosure and Confidentiality Agreement for additional agreements and expectations.

Notice to Governmental End Users

If any Shift4 product is acquired under the terms of a Department of Defense contract: use, duplication, or disclosure by the US

Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of 252.227.7013. Civilian agency contract: use,

reproduction, or disclosure is subject to 52.227-19 (a) through (d) and restrictions set forth in the accompanying end user

agreement. Unpublished rights reserved under the copyright laws of the United States.

Summary of Contents for UTG Ingenico 3070































































Search results

Summary of Contents for UTG Ingenico 3070

Reviews:

Related manuals for UTG Ingenico 3070

Brands by name

Popular brands

SHIFT4 UTG Ingenico 3070, Manual

Search results

Summary of Contents for UTG Ingenico 3070

Reviews:

Related manuals for UTG Ingenico 3070

Brands by name

Popular brands