Shibaura TF516MH-AB, Owner'S Manual

Page: 12 / 40

10
3. Handling of pump (Before starting operation)
3. Replenishing the fuel
(1)
Supply the fuel into the tank (tank capacity 4.2L).
The engine of this firefighting pump is fueled
independently of the lubricating tank. Supply
automobile regular gasoline up to the “F” mark of
the fuel gauge. Do not use mixed gasoline and
Bio-gasoline.
○
Do not bring a fire close to the engine when supplying fuel.
○
Do not allow the fuel to exceed the “F” mark of the gauge.
○
If the fuel spills, wipe it away immediately. Do not bring that cloth to a fire
⚫ It may catch fire and explode.
○
After supplying fuel, close the fuel tank cap securely.
⚫ If not, the fuel may catch fire and explode.
(2)
Supply 2-cycle engine oil (tank capacity 0.4L).
The fire pump is a separate filling type. Supply
the 2-cycle engine oil to the engine oil tank
provided on the lower part of the pump.
Caution
Lights when the oil tank level is too low
thereby stopping the engine.
○
If you want to supply the 2-cycle oil, please put the oil of same brand and
same grade.
○
At the time of 2 cycle oil supply, please prevent water and dirt from the oil
inlet.
⚫ Cause of the malfunction or equipment failure of the engine.
○
Oil spills, please wipe completely with a cloth or the like.
⚫ There is a risk of injury by falling slipped.
Caution
Danger
Caution
Caution