Shibaura TF516MH-AB, Owner'S Manual

Page: 27 / 40

25
4. Periodical inspections
○
Entrust a professional industrial waste disposal dealer with disposal of the
battery, oil, grease, etc.
⚫ If not, fire, burnt or environmental pollution may result.
(2)
Handling of Shibaura full-automatic charger
a. HOW to USE
①
Before charging, check that the power plug is disconnected (that is,
the body of this charger in a stopped state).
②
Connect the output connector to the fire pump to lock it securely.
③
Connect the power cord to the AC inlet of this charger.
④
Connect the power cord to the outlet. The red LED comes on, and
charging starts.
⑤
As the charging proceeds and the charging state reaches 80% or
more, the green LED comes on (timer charge starts). If the charging is
continued in this state, the red LED comes off to indicate the full
charge state, and this state is kept (trickle charge starts).
⑥
To terminate charging, pull out the power plug. After the body of the
charger stops, disconnect the output connector.
Note: When trickle charge is to be continued, the continuous trickle
charge period must be within three months.
CHARGE STATUS
CHARGE LED (red) FULL LED (green)
Body stopped state OFF OFF
Charge ON OFF
Timer charge ON ON
Trickle charge OFF ON
NFB operation/Bad connection OFF OFF
Note: If only the green LED comes on immediately after charging starts
while the engine is not started, the battery may be in a deteriorated state.
Caution