Shibaura ST460, Operator'S Manual, Page: 90 / 126

SECTION 3 – LUBRICATION AND MAINTENANCE
3-23
FUSE BLOCK
The fuse block is located in the engine
compartment on the right side of the tractor
firewall. Always replace blown fuses with the size
specified for that circuit.
WARNING
Always Disconnect the negative (-) battery
cable from the negative (-) battery terminal
before replace the fuses.
From left to right as viewed from above the
tractor, the fuse block contains the following
fuses:
Fuse
Fuse
Size
Circuit Protected
1 15A Alternator, Safety Start,
Indicator Lamps, Gauges,
Road Lights, Tail lights,
ACC Power Relay,
2 15A Horn, Brake Lamp, PTO
Valve
3 20A Turn Signal, Hazard Lights,
Brake Lamp,
4 15A Work Lamp, Engine Control,
5 25A Road lights, Illumination Lamp
of Instrument Panel.
MAIN FUSE
The main 40-amp fuse
①
is located on the LH
side of the engine, between the starter and the
alternator. This fuse protects the tractor's entire
electrical system.
To replace the main fuse:
1. Unplug the connector, exposing the fuse.
2. Remove the old fuse from the fuse holder
and replace the new one.
IMPORTANT: Always replace this fuse with a
similar 40 amp fuse; DO NOT increase the
amperage rating.
WARNING
Always Disconnect the negative (-) battery
cable from the negative (-) battery terminal
before replace the fuses.