Shibaura ST460, Operator'S Manual

Page: 59 / 126

SECTION 2 – OPERATION
2-34
HYDRAULIC MANIFOLD BLOCK/DIVERTER
VALVE
The hydraulic manifold block/diverter valve is
located on the right-hand side of the tractor
below the platform. The manifold block
distributes pump oil to the HPL valve, optional
rear remote valves, the transmission / rear axle
reservoir and the valve for attached implement.
The diverter valve
①
can be turned with a blade
screwdriver. In the 1 o’clock position, hydraulic
fluid is directed to the HPL valve and rear
remotes (optional). When a valve for another
attached implement is plumbed to the three ports
- (pressure out
② pressure return ③ and sump
or tank, 4), the diverter valve must be turned
counter-clockwise to 11 o’clock position for
hydraulic fluid flow to the implement valve and
then to the HPL valve and rear remote valve
(optional).
NOTE: The PTO valve, EHSS valve and power
steering always receives hydraulic flow
independent of the manifold block diverter
setting.