Shibaura ST460, Operator'S Manual

Page: 44 / 126

SECTION 2 – OPERATION
2-19
INCHING PEDAL (EHSS)
The foot operated inching pedal ① must be
completely depressed to stop forward or reverse
travel. Always depress the inching pedal fully
when changing main shift, and range gears, also
when engaging the creep gear, and front wheel
drive.
NOTE: The inching pedal controls the dump
valve, via a control cable, for the hydraulic
shuttle shift transmission. When the inching
pedal is depressed the dump valve releases all
the hydraulic pressure to the transmission
hydraulic clutch packs. There is not a dry clutch
located in the engine flywheel area to control
transmission drive.
IMPORTANT : If the operator leaves the seat,
with the key in the “ON” position or the tractor
running, the inching pedal
①
has to be fully
depressed when the operator returns to the seat,
to allow the transmission to operate.
CLUTCH PEDAL (SSS)
The foot operated clutch pedal
①
must be
completely depressed to stop forward or reverse
travel. Always depress the clutch pedal fully
when changing forward/reverse shuttle, main
shift, and range gears, also when engaging the
creep gear, and front wheel drive.