Shibaura ST460, Operator'S Manual

Page: 72 / 126

SECTION 3 – LUBRICATION AND MAINTENANCE
3-5
LUBRICANTS
Type of lubricant to use,
Transmission, Rear Axle, Final
Reduction, and Hydraulic System
(For SSS) ········· SAE 80
(For EHSS) ·· ISO VG 46
Front Axle, Final Reduction Oil ················ SAE 80
Power Steering Oil ······························ ISO VG46
Engine Crankcase ··················· Service Grade CD
SAE 10W30, for year around use
or
SAE 20W for use -5°C–25°C
SAE 30 for use 10°C–35°C
All Lubrication Fittings ········· NLG 1 GRADE 2 EP
GREASE WITH LTIUM
SOAP
NOTE: Use the following chart to determine
which SAE Grade engine oil to use:
In areas where prolonged periods of extreme
temperatures are encountered, local lubricant
practices are acceptable, such as the use of SAE
5W (CC) in extremely cold temperatures or the
use of SAE 40 (CD) or SAE 50 (CD) in extremely
high temperatures.
IMPORTANT: Engine crankcase oil drain
intervals should be adjusted downward when
diesel fuel sulfur content is over 0.5%.
Consult your SHIBAURA dealer for details of
Engine Crank case Oil usage.