Shibaura ST318, Workshop Manual

Page: 143 / 247

142
6 4WD drive shaft
➀
Remove the 4WD shifting system case cover form
the side of the transmission case. (See the
paragraph of 9 × 3 manual transmission.)
➁ Remove the snap ring at the rear end of the shaft
and take out the slide gear.
➂
Extract the drive shaft frontwards.
NOTE: If required, remove the oil seal from the
transmission case (front).
7 Counter shaft
➀
Extract the shaft frontwards and take out the
bearing on the front from the shaft.
➁ Move the shaft frontwards until it comes out of the
drive pinion and take it out from above the case.
➂
If necessary, take out the needle bearing at the rear
end of shaft.
8 Differential ass’y
➀
Remove the right and left bearing carriers.
➁
Take out the differential ass’y.
* Refer to the paragraph 9 × 3 manual transmission
for details.
T526
T527
T528
T529