5/15
6/15
380mm
1
100mm
2
3
3D projection position
Sliding Rail
2D projection position
Motorized Bracket
Install fastener
Cabinet Mount Component
The distance between top
o f m o v e a b l e b r a c k e t a n d
projector lens center is 380m
The distance between top
of moveable bracket and
projector lens is 100mm
Fix cabinet mount components to
the projector cabinet with clips
5.2 Bracket
Each Turbo Screen system has a bracket to match with the projector
pedestal . It can be used to adjust the Turbo Screen system's height, angle,
left and right as well as front and rear position to perfectly fit the space of
the
system and projector. It receives signal from projector
Turbo Screen
through
Signal SYNC Cable
, and identify the projector status of 2D or
3D, and move to the right position.
Figure 5-2 Bracket
6. System Installation
6.1 Installing Pedestal Mount Components:
adjust the
height and length of pedestal mount components, and fix the components
onto the projector pedestal with fastener, as shown in
Figure 6-1.
Figure 6-1 Installing Pedestal Mount Components