background image

1

Projector

CP-734i

User's Manual – Operating Guide

Thank you for purchasing this projector.

WARNING

  ►Before using, read the "User's Manual - Safety Guide" and 

these manuals to ensure correct usage through understanding. After reading, 

store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are 

described below. 

WARNING

  This symbol indicates information that , if ignored, could possibly 

result in personal injury or even death due to incorrect handling.

CAUTION

  This symbol indicates information that , if ignored, could result 

possibly in personal injury or physical damage due to incorrect 

handling.

  Please refer to the pages written following this symbol.

NOTE

  • The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.

• The reproduction, transmission or use of this document or contents is not permitted without 

express written authority.

Trademark acknowledgment

• VGA and XGA are registered trademarks of the International Business Machines 

Corporation.

• Apple and Mac are registered trademarks of the Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of the Microsoft Corporation.

• Internet Explorer is a trademark of the Microsoft Corporation.

All other trademarks are the property of their respective owners.

Summary of Contents for CP-734i


















































Reviews: