SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. EDS780 Series, User Manual

Page: 16 / 30

www.enc.net.cn/en Tel/Fax:86-755-26984485/26985120
3 Function parameter schedule graph
13
F3 group –closed-loop run function parameter group
Function
code
name Set range unit
Factory
default
modif-
ication
F3.00 Closed-loop run
control selection
0: closed-loop control ineffective
1: PID closed-loop control effective
2: reserved
1 0 ×
F3.01 Provision channel
selection
0: digital provision
1: VCI analog 0
－
5V voltage provision
2: reserved
3: keypad analog potentiometer provision
1 1 ○
F3.02 Feedback channel
selection
0: VCI analog input voltage 0
－
5V
1: reserved
1 1 ○
F3.03
Specified value digital
setting
0.00 － 10.00V
0.01 0.00 ○
F3.04 Minimum specified value 0.0
－
maximum specified value; percentage
relative to 10.00V
0.1 ( % ) 0.0 ( % ) ○
F3.05
feedback value
responding to
minimum specified value
0.0(%) － 100.0(%)
0.1 ( % ) 0.0 ( % ) ○
F3.06 maximum specified
value
Minimum specified value － 100.0 （％）
0.1 ( % ) 100.0(%) ○
F3.07 feedback value
responding to
maximum specified
value
0.0 （％）－ 100.0 （％）
0.1 ( % ) 100.0(%) ○
F3.08 proportion gain Kp
0.000
－
9.999
0.001 0.050
○
F3.09 Integral gain Ki
0.000 － 9.999
0.001 0.050 ○
F3.10 Differential gain Kd
0.000 － 9.999
0.001 0.050 ○
F3.11 Sampling cycle T
0.01 － 1.00s
0.01s 0.10s ○
F2.47 Jumping freq. 2
0.00 － 400.00Hz
0.01Hz 0.00Hz
×
F2.48 Jumping freq. 2 range
0.00 － 30.00Hz
0.01Hz 0.00Hz ×
F2.49 Jumping freq. 3
0.00
－
400.00Hz
0.01Hz 0.00Hz ×
F2.50 Jumping freq. 3 range
0.00 － 30.00Hz
0.01Hz 0.00Hz ×
F2.51 Setting run time
0 － 65535 hours
1 0
○
F2.52 Accumulative run time
0 － 65535 hours
1 0 *
F2.53 RS485communication
frame format selection
0: a ASCII frame of 14 byte or 18 byte
1: a hex frame of 8 byte or 10 byte, original
response not changed
2: a hex frame of 8 byte or 10 byte, 12
command has no response
3: a hex frame of 8 byte or 10 byte, 14
command has no response
4: a hex frame of 8 byte or 10 byte, both 12
and 14 command have no response
1 0 ×