SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. EDS780 Series, User Manual

Page: 20 / 30

www.enc.net.cn/en Tel/Fax:86-755-26984485/26985120
3 Function parameter schedule graph
17
F5.07 reserved
F5.08 FWD/REV run mode
selection
0: double-line control mode 1
1: double-line control mode 2
2: three-line control mode 1
3: three-line control mode 2
1 0 ×
F5.09 UP/DOWN velocity
0.01
－
99.99Hz/s
0.01Hz/s 1.00Hz/s ○
F5.10 Reserved
F5.11 reserved
F5.12 reserved
F5.13 reserved
F5.14
Frequency arriving
(FAR) checkout scope 0.00 － 50.00Hz
0.01Hz 5.00Hz ○
F5.15 FDT1 (frequency
level) electric level
0.00
－
high limit frequency
0.01Hz 10.00Hz ○
F5.16 FDT1 lag
0.00 － 50.00Hz
0.01Hz 1.00Hz
○
F5.17 Reserved
F5.18 Analog output (AO) gain 0.00
－ 2.00
0.01 1.00 ○
F5.19 Analog output (AO) offset 0.00
－ 10.00V
0.01 0.00 ○
F5.20 reserved
F5.21 reserved
F5.22 reserved
F5.23 reserved
F5.24 reserved
F5.25
Set interior counting value
reaches provision 0--9999
1 0 ○
F5.26
Specified interior counting
value reaches provision 0--9999
1 0
○
F5.27 Interior timer setting
0.1 － 6000.0s
0.1 60.0
○
F6 –traverse special function parameter group
Function
code
name Set range unit
Factory
default
modifi
cation
F6.00
～
F6.07
Reversed
F7–frequency provision function parameter group
Function
code
name Set range unit
Factory
default
modifi
cation
F7.00
VCI min. provision 0.00 － F7.02
0.01V 0.00V ○
F7.01
VCI min. provision corresponding freq. 0.00
－
high limit frequency
0.01Hz 0.00Hz ○