Sharp YO-470 Operation Manual Download Page 6 | Manualshive

Page: 6 / 46

background image

PB

AUTO POWER OFF function

When none of the keys have been pressed for approximately 7
minutes, the Organizer automatically turns the power off to save the
batteries. (The actual time may vary depending on the conditions of
use.) Press

ON

to resume operation.

Backlight

Pressing

BACKLIGHT

once illuminates the display and the Backlight

will remain on for as long as you continue to use the Organizer, or when
none of the keys have been pressed for fifteen seconds.
The Backlight may remain on for less than fifteen seconds if the battery
level is very low.
The length of time to turn on the Backlight can be changed. (Refer to
page 31.)

NOTES:

Do not use the Backlight unnecessarily.
• Since the Backlight drains power from the operating batteries,

excessive use of the Backlight will significantly reduce your battery life.

• Continuous use of the Backlight will, over time, lead to gradual loss

of brightness.
If the Backlight is on for 10 minutes per day (for example 15 seconds
40 times a day), the brightness will be reduced by half after 10* years
(at an ambient temperature of 25

°

C/77

°

F and 65% humidity).

* This figure may vary depending on the surrounding environment.

Freeing up memory

When you turn the power on, the following message may be displayed,
asking you to free up memory by deleting unnecessary space:
“DO YOU WANT TO FREE UP MEMORY? (Yes/No)”
Press

Y

to delete them. Freeing up memory requires maximum one

minute.
Press

N

when you wish to start the operation soon.

For more information, refer to page 31, “Freeing up memory”.

GETTING STARTED

Display symbols

BATT

This symbol appears when the operating battery level is low.

Åñ

The data appearing on the display is secret data accessible
only by password.

S

The secret function is in effect.

A “beep” will sound when a key is pressed.

The specified schedule alarm(s) will sound.

CAPS

Capital (uppercase) letters will be entered. To enter small
(lowercase) letters, turn “CAPS” off by pressing

CAPS

.

EDIT

The entry on the display may be edited.

2nd

2nd

has been pressed.

Å™Å´

There is more data which is not on the display. The data can
be displayed by pressing

or

.

NOTE:

The symbol “

★

” shown by setting the LCD contrast to DARK is

not used in this product.

The

keys

These keys are used to select capital or small letters or to access the
symbols marked in white above keys. While holding down

, press

the desired key to be entered.

Turning the “beep” on and off

While “ ” is displayed, a “beep” will sound when a key is pressed. To
turn the “beep” on and off, press

2nd

. The “beep” will not

sound after “ ” goes off. To turn the “beep” back on, repeat the
process.

«
...
4
5
6
7
8
...
»

Summary of Contents for YO-470















































Reviews:

No comments

Related manuals for YO-470

Brand: Sharp Pages: 61

Brand: Casio Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands