manualshive.com logo in svg

Sharp VL-PD6H Quick operation, Operation Manual

Share
Download
Sharp VL-PD6H Quick operation Operation Manual Download Page 23

Preparation

14

Installing the Lithium
Memory Battery

Installing the Battery in the
Camcorder

The supplied lithium battery is used to store the
memory of the date and time settings.

1

Press the LCD monitor OPEN release
button (

Q

) and open the LCD monitor

(

W

).

2

Open the lithium battery compartment
door using the tip of a ballpoint pen or
other pointed object.

3

Insert the lithium battery into the
compartment with the 

`

 side facing out.

4

Replace the compartment door, and
close it firmly until it clicks into place.

5

Close the LCD monitor until it clicks into
place.

Q

W

LCD monitor
OPEN release button

Removing the lithium battery

Perform steps 1 and 2 above.
Lift up the battery using a
pointed object, and take it out.

Note:

• Replace the battery with a new CR2025 lithium

battery when the time indicator of the camcorder
starts to fall behind the correct time.

Installing the Battery in the Infrared
Remote Control

1

Hold the remote control
facing down, and pull out
the battery holder while
pressing the tab toward
the centre.

2

Insert the supplied lithium battery into
the holder with the 

Ⳮ

 side of the battery

facing the 

j

 side of the holder.

3

Insert the holder in
the direction of the
arrow.

• Make sure that the 

j

side faces the back
of the remote control.

Notes on the Use of the Lithium
Battery

• Do not short-circuit, recharge, disassemble, or

heat the lithium battery.

• Should the lithium battery leak, wipe the battery

compartment clean, and then insert a new
battery.

• The lithium battery will last about one year under

normal usage.

CAUTION:

 Danger of explosion if battery is

incorrectly replaced. Replace only with the
same or equivalent type CR2025 recommended
by the equipment manufacturer.

 

WARNING

  

KEEP THIS BATTERY AWAY FROM

CHILDREN. IF SWALLOWED, CONSULT A
PHYSICIAN IMMEDIATELY FOR EMERGENCY
TREATMENT.

 

CAUTION

  

BATTERY MAY EXPLODE IF MIS-

USED OR INSTALLED WITH POLARITY
REVERSED. DO NOT RECHARGE, DISAS-
SEMBLE OR DISPOSE OF IN FIRE.

VL-PD6H/009-018

01.4.24, 0:24 PM

14

Downloaded from: 

http://www.usersmanualguide.com/

Summary of Contents for VL-PD6H Quick operation





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands