manualshive.com logo in svg

Sharp VL-PD6H Quick operation, Operation Manual

Share
Download
Sharp VL-PD6H Quick operation Operation Manual Download Page 21

Preparation

12

Inserting and Removing a
Mini DV Cassette

Inserting a Cassette

1

Supply power to the camcorder, then
slide the cassette compartment door
release and open the cassette
compartment door.

• A confirmation sound is made, and the

cassette holder extends and opens
automatically.

PUSH mark

Cassette compartment
door release

Erasure
protect tab

3

Press the PUSH mark gently until the
cassette holder clicks into place.

• A confirmation sound is made, and the

cassette holder retracts automatically.

Note: 

If the hand strap is pulled too tight, it

can obstruct the opening of the cassette
compartment door and the cassette holder
may be unable to extend. Should this occur,
loosen the hand strap and open the cassette
compartment door completely.

2

Insert the cassette fully with the window
facing outwards, and with the erasure
protect tab facing upwards.

Removing a Cassette

Perform step 1 above, then take out the
cassette.

Cautions:

• Do not try to close the cassette compartment

door while the cassette holder is extending or
retracting.

• Be careful not to get your fingers caught in the

cassette holder.

• Do not apply force to the cassette holder except

when pressing the PUSH mark to close it.

• Do not tilt the camcorder or hold it upside down

when you are inserting or removing a cassette. It
may damage the tape.

• Remove the cassette if you will not use the

camcorder for a long period of time.

• If you do not correctly close the cassette holder

in step 3, the camcorder’s cassette protection
mechanism might eject the cassette. If this
happens, repeat the insertion procedure.

• Do not attempt to pick up the camcorder by the

cassette compartment door.

Notes:

• If the battery power is too low, you may not be

able to eject the cassette. Replace the battery
pack with a fully charged one.

• See page 95 for more information on the video

cassette tapes intended for use with this
camcorder.

4

Wait for the cassette holder to fully
retract. Close the compartment door by
pressing the centre until it clicks into
place.

SA VE

RE

C

SA VE

RE

C

VL-PD6H/009-018

01.4.24, 0:24 PM

12

Downloaded from: 

http://www.usersmanualguide.com/

Summary of Contents for VL-PD6H Quick operation





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands