Simple Recording Timer
There are two ways to use this Simple Recording Timer for
l
Immediate
your convenience.
Convenient when
an unexpected visitor or
telephone call
l
Delaved
Immediate Recording
the house or going to bed.
Select the channel position to be recorded by pressing
CHANNEL
(CH
(fx.: Channel position: 2)
. REC
@ Press REC to enter the normal recording mode. Then,
press REC repeatedly to set the desired ending time.
(fx.: Ending time:
AM)
l
Each press of
REC
increases the stop time by minutes
l
Press
STOP
to terminate recording
Delayed Recording
. REC
0
STEREO
(
Select the channel position to be recorded by pressing
CHANNEL
(CH
(fx. : Channel position: 2)
Set the starting time by pressing
(Ex.: Starting
time:
AM)
l
Each press of
Increases the start time by minutes.
*Setting the time within a
period in
intervals is
possible.
Set the ending time by pressing REC.
Ending time:
AM)
l
Each press of
REC
increases the stop time by 10 minutes.
Press
STANDBY to turn to the POWER STANDBY mode.
(See page 5, item 2.)
(Ex.: Present time:
AM)
*After
the Simple Recording Timer is set, the channel position cannot be changed
confirm the starting time and the ending time, first turn on the power Then press
to confirm the starting and
ending time. And turn to the POWER STANDBY mode.
l
To clear the Simple Recording
setting during setting of “Delayed Recording”, press
CLEAR
on the remote control. T
O
clear after
turn on the power, press
to select Simple Recording Timer mode, and then while the
time is
press
CLEAR.
l
The Simple Recording Timer cannot be set the
has been preset
indicator on the VCR display is lit). If this is the
case, cancel the timer standby mode by pressing
TIMER ON/OFF,
turn on the power and then proceed with setting of the
Simple Recording Timer.
l
Select the SP (Standard Play) or LP (Long Play) recording speed with
TAPE SPEED
on the remote control
or “LP” will
light up on the VCR display). SP (Standard Play) gives the best picture quality. LP (Long Play) gives the largest recording
time.
l
The stop time for delayed recording must be set within 10 seconds of setting the start time, otherwise start
must be set
again.
25