background image

Page 1

May 22, 2001 9:10 am

VIDEO CASSETTE RECORDER

HR-J481MS

INSTRUCTIONS

LPT0591-001A

Printed in Malaysia

COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.

0501 MNV

f

PJ

f

PJ

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Cassettes marked “VHS” (or “S-VHS”) can be used with this 
video cassette recorder. However, S-VHS recording is not 
possible with this model.

This model is equipped with SQPB (S-VHS QUASI PLAYBACK) 
that makes it possible to play back S-VHS recordings with 
regular VHS resolution.

HQ VHS is compatible with existing VHS equipment.

CAUTION

When you are not using the recorder for a long period of 
time, it is recommended that you disconnect the power cord 
from the mains outlet.

Dangerous voltage inside. Refer internal servicing to qualified 
service personnel. To prevent electric shock or fire hazard, 
remove the power cord from the mains outlet prior to 
connecting or disconnecting any signal lead or aerial.

ATTENTION

1. This recorder can also receive SECAM colour television 

signals for recording and playback.

2. Recordings made of SECAM television signals produce 

monochrome pictures if played back on another video 
recorder of SECAM standard, or do not produce normal 
colour pictures if played back on another video recorder of 
PAL standard.

3 SECAM prerecorded cassettes or recordings made with a 

SECAM video recorder produce monochrome pictures when 
played back with this recorder.

POWER SYSTEM:

This set operates on voltage of AC110 – 240 V

d

 (Rating), AC90 –

260 V

d

 (Operating), 50/60 Hz with automatic switching.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical 
burn hazard if mistreated. Do not recharge, disassemble, heat 
above 100°C or incinerate.
Replace battery with Panasonic (Matsushita Electric), Sanyo, 
Sony or Maxell CR2025. Danger of explosion or Risk of fire if 
the battery is incorrectly replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

IMPORTANT

Please read the various precautions on this page before 
installing or operating the recorder.

It should be noted that it may be unlawful to re-record pre-
recorded tapes, records, or discs without the consent of the 
owner of copyright in the sound or video recording, 
broadcast or cable programme and in any literary, dramatic, 
musical, or artistic work embodied therein.

The STANDBY/ON 

1

 button does not completely shut off 

mains power from the unit, but switches operating current on 
and off. “

1

“ shows electrical power standby and “ 

!

 “ shows 

ON.

Video tapes recorded with this video recorder in the LP (Long 
Play) or EP (Extended Play) mode cannot be played back on a 
single-speed video recorder.

HR-J481MS-EN.fm  Page 1  Tuesday, May 22, 2001  9:12 AM

Summary of Contents for HR-J481MS

















Reviews: