Menu Screen
Turn on your TV and select the video channel.
Turn on the VCR. (See page 5, item 3.)
Press MENU to display the MENU screen.
Select the item you want by pressing or on the remote control. Refer to
the pages listed below for details on each item.
The following 6 items can be set by using the On Screen Display (OSD).
1: G-CODE Setting a G-CODE timer recording. (See page 26.)
.
2 : T I M E R S e t t i n g a t i m e r r e c o r d i n g ( a n d c h e c k i n g i t ) , ( S e e p a g e
28 for the setting procedure.)
3: MODE VCR operating conditions are set according to the
broadcast reception and tape playback conditions. (See page 17.)
4: CHANNEL PRESET Setting the channels. (See page 13.)
5: CLOCK Setting the present time. (See page 12.)
6: LANGUAGE Selection of language to be used for the On Screen Display. (See page 11.)
Press SET. The screen changes to the item which you have selected.
To cancel the MENU screen, press MENU.
l
During recording, the background
of the MENU screen will become lighter. This does not indicate a malfunction.
OSD (On Screen Display)
The tape counter and VCR mode can be shown on the screen while you are playing back a tape or watching a
broadcast on the video channel.
S. PICTURE (New
Super Picture)
AUDIO DUB (MIX) indicator
PLAY, X2
FF
VSR, REW
n
STOP, CASSETTE IN
F. ADV
II
STILL
l
REC
l
II REC PAUSE
Programme channel
Audio System (STEREO/I/II)
Audio output indicator
Auto Fieoeat
Clock display
Calendar
ea
l
If the clock is not set, the time and date will not be displayed.
How to Display Indicators
Turn on your TV and select the video channel.
Turn on the VCR. Mode indicators are displayed the AUTO display screen.
Each time MODE OSD is pressed, the screen changes as follows:
AUTO Display
FULL Display
COUNTER Display
Display off
AUTO Display
When an each of the operation buttons, numeric button, or CHANNEL
(CH
is pressed, the current
mode or the number of the channel will be displayed in the upper section of the TV screen for about 3 seconds.
l
When you record a video signal output from this VCR on another VCR, press MODE OSD to select
Off. (If the mode
indicator is displayed on the screen, is also recorded on the tape )
16
