Recording with the Timer
The timer can be set manually for automatic recording of up to 8 events over a 365 day period.
PREPARATION
l
Select the video channel on your TV. Turn on the VCR (See page 5, item 3).
l
Load the cassette,
the erasure
protection
hole is covered. The VCR power will automatically turn on.
l
Check that the clock is displaying the correct time. (See Setting the Clock
on page 12.)
PROCEDURE
Example: Recording channel position 47 in SP mode from 12:OO PM to
PM, December 15, 1998, if the
present time is
(morning), December 14, 1998.
0
[Timer position]
[Daily/Weekly]
.
. .
Numeric
buttons
[Channel]
Press MENU.
Select the TIMER-setting mode and press SET.
Select the timer position with
and press SET.
l
If the timer positions 1 to 4 have already been set, the
screen changes
(timer positions 5 to 8).
Set the date for timer recording with the numeric buttons
or
on the remote control and then press
. First set the “day” digits and then “month”. If there is
only one “day” or one “month” digit, enter a 0 first.
If you want to record only once, press and go to step
Otherwise, select
(DAILY)” to record at the same
time each day or
(WEEKLY)” to record at the same
time each week by pressing or
and then pressing
. .
Set the channel number using the numeric buttons or
and then press . .
record audio and video from an external source through an
AUDIO/VIDEO terminal on the VCR, press
to select an AV
channel (When an AV position is selected,
or
is displayed
where a channel position number is usually displayed.)
l
can also be used to set the date and time Instead of the numeric buttons
l
Press 0 first if the day, month, hour or minute
IS
a
Continued on next page
28