Sharp VC-H670X Operation Manual Download Page 5

Page: 5 / 41

LOW POWER Feature

This model is equipped with a LOW POWER feature to save energy when the VCR is not in use

STANDBY/LOW POWER

button

Clock keeps time regardless

of this button

This VCR is not equipped with a

power switch. Accordingly, nominal

current to drive the clock

drawn at all

when the AC power cord is

plugged into a wall socket. If the VCR

not to be used for an extended period,

be sure to unplug the cord.

1. Definitions of POWER modes

POWER ON mode

VCR in operation or ready for operation.

VCR display is on.

POWER STANDBY mode

VCR in standby mode.

VCR display is on.

LOW POWER mode

VCR display is off, but clock continues to keep time.

. Noise may appear on the screen when watching TV in this mode. If this

occurs, switch to POWER STANDBY mode.

This mode cannot be used when the programmable timer is set to

TIMER ON.

2. In POWER ON mode

Each time STANDBY/LOW POWER

the

VCR or the remote control

(VCR STANDBY for

STANDBY for VC-H670X) is pressed, the POWER MODE changes as shown below.

(Current)

POWER ON mode

POWER STANDBY mode

LOW POWER mode

LOW POWER mode cannot be used when the programmable timer is set to TIMER ON.

3. Switching from POWER STANDBY or LOW POWER mode to POWER ON

mode.

(Press STOP on the remote control)

Press STOP on the VCR or the remote control to switch from POWER STANDBY mode to POWER ON

mode.

Press STOP on the remote control to switch from LOW POWER mode to POWER ON mode.
By pressing one of the tape operation buttons on the remote control (PLAY, REW, FF, etc.) with a video

tape in the VCR, the mode will

switch to POWER ON and the tape operation will begin.

loaded

Summary of Contents for VC-H670X










































Search results

Summary of Contents for VC-H670X

Reviews:

Related manuals for VC-H670X

Brands by name

Popular brands

Sharp VC-H670X, Operation Manual

Search results

Summary of Contents for VC-H670X

Reviews:

Related manuals for VC-H670X

Brands by name

Popular brands