Sharp TQ-CX1 User Manual Download Page 107

Page: 107 / 133

Voicemail

Setting up your voicemail feature

Perform the following steps to set up your voicemail feature:

Press and hold [Left soft key] for at least two seconds.

Create your own pass code.

Record your name.

Create a greeting the caller will hear.

Enable the One-Touch Access feature, if necessary.

Reviewing voicemail messages

There are two ways to review voicemail messages: either to
display them in Standby mode or to use the One-Touch Access
feature (see below).

In Standby mode

Press

[Message] to display the Message menu.

Press

to select Voicemail.

The message “Voicemail New” will be displayed.

Press

[Listen] to play a voicemail message.

Note

Press

[Erase] to clear the mail indicator (

) on the display, if

necessary. (The indicator will be also cleared automatically when you
have played all the messages received.)

One-Touch Access feature

Press and hold

[Message].

< Carrier dependemt >

Summary of Contents for TQ-CX1






































































































































Search results

Summary of Contents for TQ-CX1

Reviews:

Related manuals for TQ-CX1

Brands by name

Popular brands

Sharp TQ-CX1, User Manual

Search results

Summary of Contents for TQ-CX1

Reviews:

Related manuals for TQ-CX1

Brands by name

Popular brands