Sharp TQ-CX1 User Manual Download Page 60

Page: 60 / 133

Key beep volume

This feature allows you to adjust the volume of beep tone (key
tone) you hear when you press a key.

Press

[MEMU] to display the Main menu.

Press

to select Sounds.

Press

to select Volume.

Press

to select Key Beep.

Press the navigation keys to display and play the options:

Silent, level 1, level 2, level 3, and level 4.

When selecting is complete, press

[OK] to save the

setting.

Earpiece

This feature allows you to adjust the volume of earpiece attached
to your phone.

Press

[MEMU] to display the Main menu.

Press

to select Sounds.

Press

to select Volume.

Press

to select Earpiece.

Press the navigation keys to display and play the options:

Level 1, level 2, level 3, level 4 and level 5.

When selecting is complete, press

[OK] to save the

setting.

Summary of Contents for TQ-CX1






































































































































Search results

Summary of Contents for TQ-CX1

Reviews:

Related manuals for TQ-CX1

Brands by name

Popular brands

Sharp TQ-CX1, User Manual

Search results

Summary of Contents for TQ-CX1

Reviews:

Related manuals for TQ-CX1

Brands by name

Popular brands