Sharp TQ-CX1, User Manual

Page: 34 / 133

18
Voice call
Making a voice call
1. Open the phone and press and hold .
The sound is heard and the wake-up screen is displayed.
Then, (antenna) and the signal strength level ( ) will
be displayed to indicate you are in a service area to make
a phone call.
2.
Enter the phone number by pressing the digit keys.
Up to 32 digits can be entered.
3.
Press to dial.
Note (Advanced ways of calling)
There are other ways to make a phone call.
1) Using the phone book (P.82)
2) Using the call logs (P.87)
3) Using the one-touch dialing (speed dialing) (P.19)
4) Using the phone number embedded in the received message
Tip
• When you have made a mistake, press to delete the last digit.
• Holding down will delete the entire number.
• If you dial the last four digits of a phone number stored in the phone
book and press , the matched entry will be recalled and be dialed
up. (P.35)
• If the phone number you dialed is not stored in the phone book, the
number will be kept displayed for 10 seconds on the display. Within the
time, you can store the number by pressing
[Store].