Sharp TQ-CX1 User Manual Download Page 61

Page: 61 / 133

Setting ringer volume for message calls

You can select a unique ringer volume for incoming message
calls.

This volume setting applies to incoming voicemail notifications,
text messages and numeric pages.

Press

[MEMU] to display the Main menu.

Press

to select Sounds.

Press

to select Volume.

Press

to select Message.

Select one of the following:

Silent, level 1 through 5 and Escalate

When selecting is complete, press

[OK] to save the

setting.

Setting the ringer volume for Alarm/Reminder

This feature enables you to select a unique ringer volume for your
alarm and Reminder.

Press

[MEMU] to display the Main menu.

Press

to select Sounds.

Press

to select Volume.

Press

to select Alarm/Reminder.

Select one of the following:

Level 1 through 5, and Escalate.

When selecting is complete, press

[OK] to save the

setting.

Summary of Contents for TQ-CX1






































































































































Search results

Summary of Contents for TQ-CX1

Reviews:

Related manuals for TQ-CX1

Brands by name

Popular brands

Sharp TQ-CX1, User Manual

Search results

Summary of Contents for TQ-CX1

Reviews:

Related manuals for TQ-CX1

Brands by name

Popular brands