Sharp MX-M283N Operation Manual Download Page 96

Page: 96 / 884

1-55

BEFORE USING THE MACHINE

Contents

Finisher (large stacker)

Open the front cover of the punch
module.

Pull out the punch waste box and
discard the punch waste.

Discard the punch waste in a plastic bag or other container,
taking care not to let the waste scatter.

Replace the punch waste box.

If the punch waste box is not replaced properly, printing will not
be possible using the punch function.

Close the cover of the punch module.

Summary of Contents for MX-M283N





















































































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-M283N, Operation Manual, Page: 96 / 884

Search results

Summary of Contents for MX-M283N

Reviews: