Sharp MX-M283N, Operation Manual, Page: 839 / 884

33
This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer
driver settings.
☞
MAC OS X: this page
(v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.5)
☞
MAC OS 9.0 - 9.2.2: page 38
MAC OS X
1
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc 2" on the
front of the CD-ROM.
2
Double-click the [CD-ROM] icon ( ) on
the desktop.
3
Double-click the [MacOSX] folder.
Before installing the software, be sure to read "ReadMe
First". "ReadMe First" is in the [US-English] folder
([English] folder in areas other than the U.S.) in the
[Readme] folder.
4
Double-click the folder corresponding
to the versions of the operating system.
5
Double-click the [MX-PKX] icon ( ).
6
Click the [Continue] button.
3
SETUP IN A MACINTOSH
ENVIRONMENT
• The PS3 expansion kit is required to use the machine as a printer in a Macintosh environment. In addition, the
machine must be connected to a network. A USB connection cannot be used.
• The scanner driver and PC-Fax driver cannot be used in a Macintosh environment.
The explanations of screens and procedures are primarily for Mac OS X v10.4. The screens may vary in other versions of the
operating system.
v10.3.9
v10.5 -
10.5.5 v10.4.11
v10.2.8
If the "Authenticate" window appears in Mac OS X
v10.2.8, enter the password and click the [OK] button.
!mxm503_us_ins.book 33 ページ ２００９年１月２２日 木曜日 午後２時２１分