MX-M503N MX-TRX2 11 – 1
MX-M503N
Service Manual
[11] MX-TRX2
1. Unpacking
A. Removal of the exit tray unit
B. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
3)
Remove the power plug of the main unit from the outlet.
B. Installation of the exit roller unit
1)
Open the right door.
2)
Remove the screw, and remove the connector cover.
3)
Remove the screw. Disengage the engagement in the front
side then in the rear side, and remove the paper exit cover.
No.
Packed part names
Quantity
1
Exit roller unit
1
2
Full detection actuator
1
1
2
OFF
1
2
1
2
3
4
