MX-M260/M310/M260N/M310N SIMULATION 6 - 16
Operation/procedure
Used to clear each paper feed counter individually.
1.
Select the counter to be cleared with the 10-key.
2.
Press the [START] key. The confirmation menu is shown.
3.
Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
Used to clear the original and staple counters individually.
1.
Select the counter to be cleared with the 10-key.
2.
Press the [START] key.
The confirmation menu is shown.
3.
Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1.
Press the [START] key. The confirmation menu is shown.
2.
Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1.
Press the [START] key.
The confirmation menu is shown.
2.
Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1.
Press the [START] key.
The confirmation menu is shown.
2.
Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1.
Press the [START] key.
The confirmation menu is shown.
2.
Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
Operation/procedure
1.
Select the counter to be cleared with the 10-key.
2.
Press the [START] key.
The confirmation menu is shown.
3.
Select “1: YES.”
1: YES (Cleared)
2: NO (Not cleared) (Default)
24-2
Purpose
Data clear
Function
(Purpose)
Used to clear the number of use (the number of prints)
of each paper feed section.
Section
Paper feed
Item
Counter
Item
Content
1
BYPASS
Manual feed counter
2
TRAY1
Tray 1 counter
3
TRAY2
Tray 2 counter
4
TRAY3
Tray 3 counter
5
TRAY4
Tray 4 counter
24-3
Purpose
Data clear
Function
(Purpose)
Used to clear the number usage data of the stapler,
RSPF, and scanning.
Section
Transport/Finisher
Item
Counter
Item
Content
1
SPF
RSPF counter
2
SCAN
Scan counter
3
STAPLE
Stapler counter
24-4
Purpose
Data clear
Function (Purpose)
Used to reset the maintenance counter.
Item
Counter
24-5
Purpose
Data clear
Function
(Purpose)
Used to reset the developer counter. (The developer
counter of the DV unit which is installed is reset.)
Section
Image process
(Photoconductor/Developing/Transfer/Cleaning)
Developer/Toner hopper
Item
Counter
Developer
24-6
Purpose
Data clear
Function (Purpose)
Used to clear the copy counter.
Item
Counter
Copier
24-7
Purpose
Data clear
Function
(Purpose)
Used to clear the OPC drum (membrane decrease)
correction counter. (This simulation is executed when
the OPC drum is replaced.)
Section
Image process
(Photoconductor/Developing/Transfer/Cleaning)
Photo conductor
Item
Counter
24-9
Purpose
Data clear
Function
(Purpose)
Used to clear the printer counter and other counters.
Section
Printer
Item
Counter
Printer
Item
Content
1
PRINTER
Printer counter
2
IMC
IMC counter
3
DUPLEX
DUPLEX counter
4
OTHERS
The other counters