MX-M260/M310/M260N/M310N SIMULATION 6 - 14
Operation/Procedure
(Initial screen)
The currently set value is highlighted beside the adjustment item.
1.
Select the adjustment item with the 10-key.
2.
Press the [START] key.
The display is shifted to the copy menu and the set value is stored.
3.
Select the paper feed tray and the print density.
4.
Press the [START] key.
Copying is started. (Printing at 1200dpi cannot be made.)
After canceling a jam (After picking up, the [C] key is invalid.)
When the other information is repeatedly printed, the display may show
the message, “Remove original from original table.” However, the oper-
ation is performed normally.
* When the IMC board is not installed, key input is disabled.
* Duplex print cannot be made.
* For the FAX SIM setting list, the display and the operating proce-
dures differ.
Note: When the simulation is canceled, the display returns to the origi-
nal state but the machine is not reset.
Operation/procedure
Used to display the administrator password.
Operation/procedure
Each counter is displayed.
The counter display is in 7 digits.
Operation/procedure
Used to display each paper feed counter.
The counter display is in 7 digits.
Operation/procedure
The detected machine composition is displayed.
(The job separator cannot be detected. Based on SIM 26-1 setting.)
EFS
SEC
American English, English, French, Spanish,
Brazilian Portuguese
SECL
SUK
SCA/SCNZ
Distributor
area
EEU
SEEG/
SEA/East
Europe,
etc.
English, German, Polish, Czech, Hungarian,
Greek, Turkish, Russian, French, Italian,
Slovak
NEU
SEF/
SEES/
SEIS/SEN,
etc.
English, German, French, Spanish, Dutch,
Italian, Portuguese, Swedish, Norwegian,
Finnish, Danish
CHN
SOCC
Simplified Chinese, American English,
English
TWN
Taiwan
Traditional Chinese (Local support),
American English, English
ARB
Saudi
Arabia
American English, English, French, Spanish,
Hebrew
(Local support), Arabic
FAS
Iran
English, Arabic, Persian
22-6
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to print each key operator setting, the account
information, and the machine adjustment values.
Item
Data
Setting/adjustment data
Item
Content
1
ALL
All lists group print (Default)
2
KEY OPE
Key operator information list
3
ACCOUNTING
COUNTERS
List of total number of prints
4
AUDITOR NO.
Department number list
5
MACHINE SIM
SETTING
Machine simulation setting list
6
FAX SIM SETTING*1
FAX simulation setting list (Only when
the FAX board is installed. The display
does not go to the print data transfer
display, but to the FAX SIM menu.)
Panel
display
Destination
Panel software support language
22-7
Purpose
User data output/Check (Display/Print)
Function
(Purpose)
Used to display of the administrator password.
Item
Data
User data
22-8
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to display the original, staple counter.
Item
Counter
SPF
RSPF counter
SCAN
Scan counter
STAPLE
Stapler counter
22-9
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the number of use of each paper feed
section. (the number of prints)
Section
Paper feed
Item
Counter
BYPASS
Manual feed counter
TRAY1
Tray 1 counter
TRAY2
Tray 2 counter
TRAY3
Tray 3 counter
TRAY4
Tray 4 counter
22-10
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the system configulation.
Item
Specifications
Option
Item
Display items
SPEED
26CPM/31CPM
DF
NONE/[1: RSPF]
OUTPUT
NONE/[2: Finisher]/[3: Job separator]
CASETTE1
NONE/[4: One-step paper feed unit]
CASETTE2
NONE/[5: Two-step paper feed unit]
IMC MEM
NONE/Expansion memory capacity (MB)
PRINTER
NONE/[6: PRINTER]
PS3
NONE/[7: PS3]
NIC
NONE/[8: NIC]
SCANNER
NONE/[9: SCANNER]
FAX
NONE/[10: FAX]
FAX MEM
NONE/Memory capacity (MB)
HAND SET
NONE/[11: Handset]
USB HOST
NONE/USB HOST