Test Simulation
46
SHARP
Document Solution Centre
22
Data Output & Check
9
Paper feed counter display
10 Machine system configuration display
11 Fax counter display
12 DSPF jam history display
13 Process cartridge counter display
14 Toner cartridge use status
18 User data delete history
19 Image Send counter display
25 Toner usage estimator data display
40 Error code list display
42 Jam/Trouble data check
43 Jam data detail display
90 System setting list print
23
Data Print Mode & Check
2
Print jam/Trouble data print mode
80 Data print mode (paper feed)
24
Data Counter & Clear
1
Jam/trouble counter clear
2
Paper feed counter clear
3
Document feed & output counter clear
4
Maintenance counter clear
5
Developer counter clear
6
Copy Counter clear
9
Print & other counter clear
10 Fax counter clear
12 Document filing counter clear
15 Network scanner counter clear
25 Toner usage estimator counter clear
25
DV Auto Adjustment & Monitor
1
Toner sensor monitor (Process drive)
2
Auto developer adjustment setting
4
Toner supply quantity data display
26
Device Configuration
2
LCC size set-up
3
Auditor setup
5
A3 Total/Maintenance counter set-up
6
Destination set-up
7
Machine ID setting
10 Network scan trial mode set-up (MX-AMX1)
18 Toner save operation
30 CE mark control setup
32 Fusing cleaning operation setting
35 Trouble memory mode setting
26
Device Configuration
38 Engine life over setting (Developer)
41 Pamphlet mode AMS operation
49 Copy speed mode setup (Postcard)
50 Function setting (B/W reverse, finisher)
52 Blank paper count mode setting (non
printed paper – insert/cover page)
53 Enable/Disable auto calibration
65 Finisher staple alarm mode set-up
69 Toner near end setting
71 Web Browsing trial mode settings
73 Poster enlargement image loss adjustment
74 OSA trial mode setting
78 Remote operation (VNC) password setting.
79 User data delete pop up display
enable/disable
30
Sensor Operation & Test
1
Main unit sensor check
2
Paper feed sensor check (main body)
10 Main unit double feed sensor operation
check
40
Bypass Operation & Adjustment
2
Bypass tray width adjustment
7
Bypass tray width detection manual setting
12 Tray 4 width detection setting
41
OSS Operation & Adjustment
1
Document sensor operation check
2
Document sensor output setup
3
Document sensor output display
43
Fuser Setting & Adjustment
1
Fuser temperature setup for each mode
2
Fusing operation and preheat setting
20 Fuser temperature. correction for low
temperature & humidity
21 Fuser temp correction for high
temperature & humidity
24 Fuser temperature correction setting
31 Fusing web cleaning motor operation check
32 Force operation of web cleaning (job end)
44
Process Control Data
1
Process control mode setting
2
Process control sensitivity adjustment