Sharp MD-DR470H Operation Manual Download Page 61

Page: 61 / 72

MD-DR470H

03/3/25 MD_DR470H_UK_6.fm

MD-DR470H(E) TINSE0513AWZZ

-Lis

ing

ugh Anothe

r S

Listening through Another System

When connecting with other equipment, turn off the
power or turn down the volume to "0".

Listening through a stereo system

Notes:

It is recommended that the volume level of the
MiniDisc unit be set to maximum when listening
through a stereo system.

When recording with a stereo system, eliminate the
confirmation sound (page 58). Otherwise, it will also
be recorded.

Recording will be made in the analogue mode.

Character information will not be recorded.

Listening through a car stereo

Notes:

Output voltage of the optional car adaptor (AD-
CA20X) is 4.5 volt direct current. It can be connected
to the DC IN 5 V socket of the unit.

Adjust the volume of both this portable MD and a car
stereo.

Do not operate this portable MD whilst you drive a car.
It may distract your attention and cause a traffic acci-
dent.

Place the unit in a stable area not to hinder driving. It
may cause an accident from falling or moving if placed
in unstable area.

Do not use any car adaptor except for the separately
available AD-CA20X.

Remove the battery when you power the unit from the
car battery.

Do not leave the unit in the place of high temperature
such as in a car in direct sunlight.

To the /REMOTE
socket

4-pole
plug

Supplied
connection cable

Supplied output
conversion cable
(4-pole to 3-pole
plug conversion)

4-pole
plug

DC IN 5 V

Supplied output
conversion cable
(4-pole to 3-pole
plug conversion)

Summary of Contents for MD-DR470H









































































Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands

Sharp MD-DR470H, Operation Manual

Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands