Sharp MD-DR470H Operation Manual Download

Page: 56 / 72

03/3/25 MD_DR470H_UK_6.fm

MD-DR470H

MD-DR470H(E) TINSE0513AWZZ

-E

Reco

Min

iDisc-

Editing a Recorded MiniDisc (continued)

Erasing a group

On a group-recorded MD, you can erase all tracks in a
group at once. (Group erase)

Caution:
Once a group has been erased, it cannot be recov-
ered. Check carefully before you erase it.

Note:
The GROUP ERASE function erases the group and
group name.

Erasing group information

You can erase the entire group information of a group-
recorded MD. By erasing the group information of a MD, it
will be a non-group MD. (Group cancel)

Caution:
The GROUP CANCEL function erases all the group
information. Check carefully before you erase it.

Insert a group-recorded MiniDisc.

Whilst in the stop mode, select the group to be
erased (page 25).

Press the MENU button.

The unit enters the menu select mode.

Select "GROUP" by press-
ing the

button and

press the MENU button.

Select "Gr TrERASE" by
pressing the

but-

ton and press the MENU
button.

Press the MENU button.

The selected group will be
erased.

Insert a group-recorded MiniDisc.

Whilst in the stop mode, press the MENU but-
ton.

The unit enters the menu select mode.

Select "GROUP" by press-
ing the

button and

press the MENU button.

Select "CANCEL" by press-
ing the

button and

press the MENU button.

Press the MENU button.

The group information will be
erased.

Summary of Contents for MD-DR470H









































































Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands

Sharp MD-DR470H, Operation Manual

Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands