Sharp MD-DR470H Operation Manual Download Page 23

Page: 23 / 72

MD-DR470H

03/3/25 MD_DR470H_UK_3.fm

MD-DR470H(E) TINSE0513AWZZ

c O

ati

-S

ound Contr

Sound Control

Volume control

Press the VOL+ button to increase the volume and the
VOL- button to decrease the volume.

To adjust the bass

[On the remote control]
Select the bass strength by pressing the BASS button.

[On the main unit]

To adjust the treble

You cannot adjust when the bass setting is "BASS OFF".
The treble cannot be adjusted by the remote control.

Notes:

Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your
usual expectations of noise, high volume may damage
your hearing.

The sound escaping from your earphones may annoy
people around you. In particularly crowded places
(such as on trains or buses), reduce the volume.

If you set the volume to 23 or more, the bass boost will
be adjusted automatically.

BASS 1:

Emphasised slightly.

BASS 2:

Emphasised more.

BASS 3:

Emphasised fully.

BASS OFF: Cancelled.

Press the MENU button.

The unit enters the menu select mode.

Select "BASS" by press-
ing the

button

and press the MENU but-
ton.

Select the bass strength
by pressing the

button and press the
MENU button again.

LEVEL 1:

Emphasised slightly.

LEVEL 2:

Emphasised more.

LEVEL 3:

Emphasised fully.

OFF:

Cancelled.

Press the MENU button.

The unit enters the menu select mode.

Select "TREBLE" by
pressing the

but-

ton and press the MENU
button.

Select the treble strength
by pressing the

button and press the
MENU button again.

LEVEL -2

Weakened more.

LEVEL -1

Weakened slightly.

NORMAL

Normal.

LEVEL +1 Emphasised slightly.
LEVEL +2 Emphasised more.

Summary of Contents for MD-DR470H









































































Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands

Sharp MD-DR470H, Operation Manual

Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands