Sharp MD-DR470H Operation Manual Download

Page: 63 / 72

MD-DR470H

03/3/25 MD_DR470H_UK_7.fm

MD-DR470H(E) TINSE0513AWZZ

Ref

renc

-T

roub

hoot

ing-

Troubleshooting

Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to
be wrong with this product, check the following before calling your authorised SHARP dealer or service centre.

The unit does not turn on.

Is the AC adaptor disconnected?

Is the battery exhausted?

Is the unit in the hold mode?

Has condensation formed inside the unit?

Is the unit being influenced by mechanical shock
or by static electricity?

No sound is heard from the earphones.

Is the volume set too low?

Is the remote control unit or the earphones
plugged in?

Are you trying to play a MiniDisc with data on it in-
stead of a MiniDisc containing music?

When the operation buttons are pressed, the unit
does not respond.

Is the unit in the hold mode?

Is the battery exhausted?

Is the remote control unit plug or the earphones
plug inserted firmly?

Some sounds are skipped.

Is the battery exhausted?

Is the unit being subjected to excessive vibra-
tion?

The MiniDisc cannot be ejected. (The compart-
ment does not open.)

Has the track number or character information
been written on the disc yet?

Is the unit in the recording or editing mode?

Is the AC adaptor unplugged or did a power fail-
ure occur whilst recording or editing? (Refer to
page 64.)

Recording and editing are impossible.

Is the MiniDisc protected against accidental erasure?

Has the recording level been properly adjusted?

Is the unit connected properly to the other equipment?

Is the AC adaptor unplugged or did a power fail-
ure occur whilst recording or editing?

Is the unit in the hold mode?

Is an optical signal being output from the stereo
system? Read the operation manual for the ster-
eo system.

Is the AC adaptor unplugged or did a power fail-
ure occur whilst recording or editing?

The battery cannot be charged.

Is the rechargeable battery in the unit?

Group functions cannot be used with the group-
recorded MD.

TOC information may have been changed with
other equipment.

Summary of Contents for MD-DR470H









































































Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands

Sharp MD-DR470H, Operation Manual

Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands