Sharp MD-DR470H Operation Manual Download Page 10

Page: 10 / 72

03/3/25 MD_DR470H_UK_2.fm

MD-DR470H

MD-DR470H(E) TINSE0513AWZZ

ati

-U

sin

Rech

eab

Bat

ter

Using with the Rechargeable Battery

Charging the rechargeable battery

When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.

Notes:

After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.

When the portable MD is turned on or operating, the
battery will not be charged.

For information about the battery life, see the battery
item in the "Specifications" on page 69.

The battery will not be charged whilst the alarm is set.

AC 230 V,
50/60 Hz

Insert the rechargeable battery.

A rechargeable battery other than the AD-N55BT
cannot be charged.

Plug the AC adaptor into the wall socket,
and then insert the plug on the other end
into the DC IN 5V socket.

Press the CHARGE but-
ton.

The battery indicator will scroll,
and battery will begin charging.

Scrolling

Summary of Contents for MD-DR470H









































































Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands

Sharp MD-DR470H, Operation Manual

Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands