Sharp MD-DR470H Operation Manual Download Page 66

Page: 66 / 72

03/3/25 MD_DR470H_UK_7.fm

MD-DR470H

MD-DR470H(E) TINSE0513AWZZ

Ref

renc

-E

r M

ess

Error Messages

A number or symbol appears in (*) position.

ERROR MES-

SAGES

MEANING

BLANK MD

Nothing is recorded.

(Replace the disc with a recorded
disc.)

BUSY

A track is being moved.

Can't COPY

You tried to record from a copy pro-
hibited MiniDisc.

You tried to record signals other
than music (such as data).

(Record using the analogue cable.)

Can't EDIT

A track cannot be edited.

(Change the stop position of the track
and then edit it.)

Can't LOCK

You tried to record or edit the MD
whilst operating the OPEN lever.

Can't PLAY

Cannot play the MD.

Can't REC

Recording cannot be performed
correctly due to vibration or shock.

Can't READ
(*)

The disc data cannot be read be-
cause the disc is damaged.

(Reload the Minidisc or replace it with
another one.)

Can't STAMP

Stamp function does not work.

(Check the number of tracks.)

ERROR MES-

SAGES

MEANING

Can't WRITE

Cannot save the TOC information
correctly to a MiniDisc.

DISC-FULL
(D-FULL)

The disc is out of recording space.

DEFECT!

The disc is scratched.

(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)

Er-MD (**)

The microprocessor has reported a
system fault and the unit is out of or-
der.

(To have it repaired, go to the distribu-
tor where you purchased the unit.)

GROUP
FULL

The total number of groups exceeds
99.

(Erase unnecessary groups.)

HOLD

The unit is in the hold mode.

BATT EMPTY
(LoBATT)

The rechargeable or alkaline battery
has run down.

LOCKED
(LOCKED)

You removed a MiniDisc whilst re-
cording or editing.

(Turn off the power before removing
the MiniDisc.)

Summary of Contents for MD-DR470H









































































Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands

Sharp MD-DR470H, Operation Manual

Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands