Sharp MD-DR470H Operation Manual Download Page 50

Page: 50 / 72

03/3/25 MD_DR470H_UK_6.fm

MD-DR470H

MD-DR470H(E) TINSE0513AWZZ

-T

Titling a MiniDisc (continued)

Master MiniDisc operation

Operation of the MiniDisc for stamping

Note:

If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.

Insert a master MiniDisc.

Do not mistake the master MiniDisc for the target
one.

Whilst in the stop mode, press the MENU but-
ton.

The unit enters the menu select mode.

Select "EDIT" by pressing
the

button

and

press the MENU button.

Select "NAME STAMP" by
pressing the

but-

ton and press the MENU
button.

Press the MENU button.

When the unit displays
"CHANGE MD", remove the
master MiniDisc.

Remove it without turning off the power. Or, the oper-
ation will be cancelled.

Load a MiniDisc for stamp-
ing.

Press the MENU button.

The unit will finish recording the
character information and enter
the stop mode.

If the total number of tracks on the
master MiniDisc does not match
that on the MiniDisc for stamping,
the unit will display "Can't STAMP"
and turn off the power.

Summary of Contents for MD-DR470H









































































Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands

Sharp MD-DR470H, Operation Manual

Search results

Summary of Contents for MD-DR470H

Reviews:

Related manuals for MD-DR470H

Brands by name

Popular brands