Sharp FO-781 Page 94 Operation Manual Download

Page: 94 / 107

Answering machine connection

Reception and copying problems

The power is on, but no
transmission takes place.

• Make sure that the receiving machine has fax paper.

• Make sure that the telephone line cord is plugged into

the TEL. LINE socket, and not the TEL. SET socket.

• If the receiving machine is in manual mode with no

attendant, reception will not be possible.

• If the receiving machine is not a Sharp model, make

sure it is G3 compatible.

• Check the display for error messages.

• Pick up the handset and check for a dial tone. Call the

receiving machine by normal (manual) dialling, and
confirm its response.

Nothing is printed at the
receiving end.

• Make sure that the document for transmission is

placed face down in the feeder.

A distorted image is
received at the other end.

• Noise on the telephone line may cause distortion. Try

sending the document again.

• Make a copy of the document on your fax. If the copy

is also distorted, your fax may have a problem. If the
problem persists, call for service.

Problem

Check and remedy

The power is on, but no
reception takes place.

• Make sure the wall socket is connected to the TEL.

LINE socket, and not the TEL. SET socket.

The printing paper comes
out blank when you try to
receive a document.

• Make sure that the document is loaded properly in the

feeder of the transmitting machine. Make a copy to
confirm the printing ability of your machine.

all_fo781a.book Page 92 Thursday, January 11, 2001 12:06 PM

Summary of Contents for FO-781












































































































Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands

Sharp FO-781, Operation Manual

Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands