Sharp FO-781 Operation Manual Download

Page: 93 / 107

Answering machine connection

11. T

roub

hooti

Line error

Dialing and transmission problems

Problem

Check and remedy

LINE ERROR appears in
the display and/or a
transaction report is printed
out with COM. E- and a
number from 0 to 1, 2, 3, 4,
5, 6, or 7 in the NOTE
column.

• Try the transaction again. If the error persists, check

the following:

• Check the connection. The cord from the TEL. LINE

socket to the wall socket should be no longer than two
meters.

• Make sure there are no modem devices sharing the

same telephone line.

• Check with the other party to make sure their fax

machine is functioning properly.

• Have your telephone line checked for line noise.

• Try connecting your fax to a different telephone line.

• If the problem still occurs, your fax machine may need

service.

Problem

Check and remedy

No dial tone when you
pick up the handset or
press the SPEAKER key.

• Make sure the handset cord is connected to the

correct socket. See Handset in Connections in
Chapter 1.

Dialling is not possible.

• Make sure the power cord is properly plugged into a

power outlet.

• Make sure that the telephone line is properly

connected to both the TEL. LINE socket and the wall
socket.

• Make sure that the fax is set to the correct dialling

mode for your telephone line. See Option Setting 7 in
Chapter 8.

all_fo781a.book Page 91 Thursday, January 11, 2001 12:06 PM

Summary of Contents for FO-781












































































































Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands

Sharp FO-781, Operation Manual

Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands