Sharp FO-781 Operation Manual Download

Page: 34 / 107

Resolution and Contrast

Resolution and Contrast

If desired, you can adjust the resolution and contrast before sending a document.

Note: The resolution and contrast settings are only effective for transmitting a
document. They are not effective for receiving a document.

You must adjust the
settings each time you
don't want to use the
default settings.

The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.

Contrast settings

Load the document(s).

AUTO

Use AUTO for normal
documents.

DARK

Use DARK for faint
documents.

•

The document must be loaded
before the resolution and contrast
can be adjusted.

Resolution settings

STANDARD

Use STANDARD for
ordinary documents.
This setting gives you
the fastest and most
economical
transmission.

FINE

Use FINE for
documents containing
small letters or fine
drawings.

SUPER FINE Use SUPER FINE for

documents containing
very small letters or
very fine drawings.

HALF TONE

Use HALF TONE for
photographs and
illustrations. The
original will be
reproduced in shades
of grey.

all_fo781a.book Page 32 Thursday, January 11, 2001 12:06 PM

Summary of Contents for FO-781












































































































Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands

Sharp FO-781, Operation Manual

Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands