Sharp FO-781 Operation Manual Download

Page: 17 / 107

Loading the Imaging Film

1. Ins

tall

tion

Loading the Imaging Film

Your fax uses a roll of imaging film to create printed text and images. The print head
in the fax applies heat to the imaging film to transfer ink to the paper. Follow the
steps below to load or replace the film.

Note: If there is paper in the paper
tray, pull the paper release plate
forward and remove the paper before
loading the imaging film.

When replacing the film, use a roll of
Sharp FO-3CR imaging film. One roll
can print about 95 A4 pages.

The initial starter roll of imaging film
included with your fax can print about
30 A4 pages.

Open the operation panel by

grasping the finger hold and pulling
up.

Pull the green release on the right

side of the machine forward, and
open the print compartment cover.

If you are installing the imaging film
for the first time, go to Step 6.

all_fo781a.book Page 15 Thursday, January 11, 2001 12:06 PM

Summary of Contents for FO-781












































































































Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands

Sharp FO-781, Operation Manual

Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands