Sharp FO-781 Operation Manual Download

Page: 14 / 107

Connections

Connections

Make sure the handset cord
goes into the socket marked
with a handset symbol on
the side of the machine!

Use the handset to make ordinary
phone calls, or to transmit and
receive documents manually.

Power lead

Plug the power lead into a 230-240 V,
50 Hz, earthed (3-prong) AC outlet.

Caution:
When disconnecting the fax, unplug
the telephone line cord before
unplugging the power lead.

Caution:
The mains outlet (socket outlet)
should be installed near the
equipment and be easily accessable.

The machine does not have
a power on/off switch, so
the power is turned on and
off by simply plugging or
unplugging the power lead.

Note: If your area experiences a high
incidence of lightning or power
surges, we recommend that you
install surge protectors for the power
and telephone lines. Surge protectors
can be purchased at most telephone
specialty stores.

Handset

Connect the handset as shown and
place it on the handset rest.

♦

The ends of the handset lead are
identical, so they will go into either
socket.

all_fo781a.book Page 12 Thursday, January 11, 2001 12:06 PM

Summary of Contents for FO-781












































































































Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands

Sharp FO-781, Operation Manual

Search results

Summary of Contents for FO-781

Reviews:

Related manuals for FO-781

Brands by name

Popular brands