[8] SIMULATION (Test Command)
⋅
USER PROGRAM
1. Simulation
A. Outline and purpose
The simulation function is provided to perform the following items. It is
used to grasp the machine operations, trouble positions, early detec-
tion of trouble causes and to make various setting and quick servic-
ing.
1) Various setting
2) Setting of specifications and functions
3) Trouble cancel
4) Operation check
5) Check, setting, clear of the counters
6) Check and clear of the machine operation state (operation history)
data.
7) Transfer of data of adjustments, setting, operation, counters
The operating procedure and the display differs depending on the
operation section type of each machine.
There are following typical types.
1) Code system: Numeric keys and functions keys are used to enter
values and to select the mode.
2) Switch system: Simulation content is selected by combination of
switch setting.
3) Selection system: Values and modes are selected with functions
keys. As a special case, a jumper wire is used to connect check
points on the PWB to select the mode.
B. Code system simulation
(1) Operating procedure and operation
∗
Entering the simulation mode
1) Clear key ON
→
Exposure mode select key ON
→
Clear key ON
→
Exposure mode select key ON
(The machine is ready for entry of the main code of simulation.)
2) Main code input by 10-key
→
Start key ON
3) Sub code input by 10-key
→
Start key ON
The machine enters the selected simulation mode.
Press the start key to start the operation of the selected simulation.
∗
Canceling the simulation and returning to the normal mode
1) Press the clear key.
FO-3800M
8 – 1
