Sharp FO-2600, Operation Manual

Page: 84 / 105

Setting 4: ACTIVITY REPORT AUTO LISTING
Press ""1" (YES)" to have your fax automatically print out an Activity Report once every 30
operations. (The list can still be printed out manually when desired.) Press ""2" (NO)" to turn
automatic print-out off.
•
Factory setting: "2"
Setting 5: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out Transaction Reports. Enter a number from "1" to "5" as
follows:
" 1 " (ALWAYS PRINTS):
Print out after each transmission, reception, or error.
"
2
" (ERR/TIMER/MEM.):
Print out only after an error, a timer operation, or a memory
operation.
"
3
" (SEND ONLY):
Print out only after a transmission.
"
4
" (NEVER PRINT):
Never print out.
" 5 " (ERROR ONLY): Print out only after an error occurs.
•
Factory setting: "3"
Setting 6: RECALL TIMES
This sets the maximum number of times your fax will automatically redial if the line is busy.
Enter any number from "1" to "4". (In Eire, enter any number from "1" to "3").
•
Factory setting: "2"
Setting 7: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic redials when the line is busy.
Press "1" for 1 minute, "2" for 2 minutes, etc., up to a maximum of 15 minutes.
•
Factory setting: "5"
Setting 8: AUTO FAX/PHONE CHANGEOVER
Press "1" (YES) to have your fax detect whether incoming calls are voice calls or fax
transmissions in automatic reception mode. Press "2" (NO) to turn the function off.
•
Factory setting: "2"
Setting 9: PSEUDO RINGING DURATION
This sets the duration of pseudo ringing when Automatic Fax/Phone Changeover is turned on.
Enter a number from "1" to "4" as shown below (in Eire, only 15 or 30 seconds can be selected).
"
1
" (15 SEC.):
15 seconds
" 2 " (30 SEC.): 30 seconds
" 3 " (60 SEC.): 60 seconds
"
4
" (120 SEC.):
120 seconds
•
Factory setting: "1"
OPTIONAL SETTINGS
6-2 OPTIONAL SETTINGS